- 29mm aluminum alloy dome tweeter
with Vertex Drive System - Twaron® aramid fiber + cellulose fiber
dual layer cone construction
6.5” 2-Way Component Speaker System
System | |
---|---|
System Type | 2-way Component |
Sound Pressure Level (Sensitivity) | 85 dB (± 1.5dB) |
Frequency Range | 30 Hz to 96 kHz |
Hi-Res Certified | Yes |
Continuous Power Handling (RMS) | 110 Watts |
Maximum Peak Power Handling | 330 Watts |
Nominal Impedance | 4Ω |
Tweeter Level Adjustability | -3dB / 0dB / +3dB |
Crossover Frequency | 2000 Hz |
Tweeter | |
---|---|
Type | Balanced Dome |
Diameter | 29mm |
Diaphragm Material | Aluminum |
Magnet Material | Neodymium |
Magnet Weight | 6.4 g |
Swivel Type | Yes |
Woofer | |
---|---|
Diameter | 6.5” |
Cone Material | Twaron aramid fiber + cellulose fiber dual layer |
Center Cap Material | Twaron aramid fiber |
Surround Material | Butyl Rubber |
Basket Material | Stamped Steel |
Magnet Material | Ferrite |
Magnet Weight | 15.2 oz |
Mounting Depth | 2.6” |
6.5” 2-Way Component Speaker System
System | |
---|---|
System Type | 2-way Component |
Sound Pressure Level (Sensitivity) | 85 dB (± 1.5dB) |
Frequency Range | 32 Hz to 96 kHz |
Hi-Res Certified | Yes |
Continuous Power Handling (RMS) | 100 Watts |
Maximum Peak Power Handling | 300 Watts |
Nominal Impedance | 4Ω |
Tweeter Level Adjustability | - |
Crossover Frequency | 2000 Hz |
Tweeter | |
---|---|
Type | Balanced Dome |
Diameter | 29mm |
Diaphragm Material | Aluminum |
Magnet Material | Neodymium |
Magnet Weight | 6.4 g |
Swivel Type | Yes |
Woofer | |
---|---|
Diameter | 6.5” |
Cone Material | Twaron aramid fiber |
Center Cap Material | Polypropylene |
Surround Material | Butyl Rubber |
Basket Material | Stamped Steel |
Magnet Material | Ferrite |
Magnet Weight | 11.3 oz |
Mounting Depth | 2.6” |
2-Way Coaxial Speaker System
System | |
---|---|
System Type | 2-way Coaxial |
Sound Pressure Level (Sensitivity) | 85 dB (± 1.5dB) |
Frequency Range | 32 Hz to 96 kHz |
Hi-Res Certified | Yes |
Continuous Power Handling (RMS) | 110 Watts |
Maximum Peak Power Handling | 330 Watts |
Nominal Impedance | 4Ω |
Tweeter Level Adjustability | - |
Crossover Frequency | 2200 Hz |
Tweeter | |
---|---|
Type | Balanced Dome |
Diameter | 29mm |
Diaphragm Material | Aluminum |
Magnet Material | Neodymium |
Magnet Weight | 6.4 g |
Swivel Type | Yes |
Woofer | |
---|---|
Diameter | 6.5” |
Cone Material | Twaron aramid fiber |
Center Cap Material | - |
Surround Material | Butyl Rubber |
Basket Material | Stamped Steel |
Magnet Material | Ferrite |
Magnet Weight | 11.3 oz |
Mounting Depth | 2.6” |
The quality of music recordings available to listeners has evolved. Hi-Res Audio recordings contain significantly more data compared to a standard CD recording and require a loudspeaker that is capable of smoothly reproducing frequencies of 40kHz or higher. The Z speakers are designed to deliver sound that’s clearer, sharper and more complex – reproducing music that is closer to the original performance.
The Z tweeter’s aluminum alloy diaphragm allows the tweeter to remain pistonic and linear at ultrasonic frequencies. The unique diaphragm shape, developed using HSDOM (Harmonized Synthetic Diaphragm Optimum Method) computer analysis, accurately controls differential vibration produced by the diaphragm and improves high frequency dispersion. Pioneer’s Vertex Drive System improves the mechanical coupling of the voice coil and the tweeter diaphragm, reducing distortion and coloration caused by low damping and increasing power handling.
Twaron is a synthetic aramid fiber that is very strong, heat resistant and rigid when woven into a cloth material. Cellulose fibers are naturally self-damping and reduce unwanted resonance. The TS-Z65CH dual layer cone, constructed with both a Twaron layer and a cellulose layer, combines the strengths of both materials. The result is fast response and clear bass, with low coloration and distortion.
1 Installation Bracket
2 Basket with Chamber
3 Acoustic Damping Material
4 Pot Type Yoke
5 6.4 g Neodymium Magnet
6 20mm Pole Piece
7 Acoustic Damping Material
8 Copper Voice Coil Wire
9 Polyimide (PI) Voice Coil Former
10 Polyester Textile Surround
11 29mm Aluminum Dome Diaphragm
12 Diaphragm Holder
13 Mesh Grille
14 Swivel Installation Bezel
15 Mounting Flange
1 Yoke
2 15.2 oz Ferrite Magnet
3 Top Plate
4 OFC Short Ring
5 Input Terminals
6 Stamped Steel Basket
7 2-layer Copper Voice Coil Wire
8 Glass Imide Voice Coil Former
9 Meta-aramid Fiber Spider
10 Twaron + Cellulose Dual-Layer Cone
11 Twaron Aramid Fiber Center Cap
12 Butyl Rubber Surround
13 Grille Frame
14 Mesh Grille
15 Pioneer Logo Badge
TS-Z65CH | TS-Z65C | TS-Z65F | |
System | |||
System Type | 2-way Component | 2-way Component | 2-way Coaxial |
Sound Pressure Level (Sensitivity) | 85 dB (± 1.5dB) | 85 dB (± 1.5dB) | 85 dB (± 1.5dB) |
Frequency Range | 30 Hz to 96 kHz | 32 Hz to 96 kHz | 32 Hz to 96 kHz |
Continuous Power Handling (RMS) | 110 Watts | 100 Watts | 110 Watts |
Maximum Peak Power Handling | 330 Watts | 300 Watts | 330 Watts |
Nominal Impedance | 4Ω | 4Ω | 4Ω |
Resonance Frequency (f0) | 57 Hz | 59 Hz | 59Hz |
DC Resistance | 3.3Ω | 3.3Ω | 3.3Ω |
Included Accessories | - Tri-position, swivel tweeter mounting kit - Mesh grille |
- Tri-position, swivel tweeter mounting kit - Mesh grille |
- |
Crossover Network | |||
Crossover Frequency | 2000 Hz | 2000 Hz | 2200 Hz |
Tweeter Capacitor Type | Film, 6.8µF | Electrolytic, 6.8µF | Electrolytic, 6.8µF |
Tweeter Inductor Type | Ferrite-core, 0.2mH | Ferrite-core, 0.4mH | Ferrite-core, 0.25mH |
Woofer Inductor Type | Ferrite-core, 0.3mH | Ferrite-core, 0.4mH | Ferrite-core, 0.3mH |
Tweeter | |||
Type | Balanced Dome | Balanced Dome | Balanced Dome |
Diameter | 29mm | 29mm | 29mm |
Diaphragm Material | Aluminum | Aluminum | Aluminum |
Magnet Material | Neodymium | Neodymium | Neodymium |
Magnet Weight | 6.4 g | 6.4 g | 6.4 g |
Pole Size | 20mm | 20mm | 20mm |
Voice Coil Former Material | Polyimide (PI) | Polyimide (PI) | Polyimide (PI) |
Voice Coil Wire Material | Copper, round wire | Copper, round wire | Copper, round wire |
Flush Mount Outside Diameter | 59mm | 59mm | - |
Flush Mount Cut-out Diameter | 51mm | 51mm | - |
Flush Mount Mounting Depth | 15mm | 15mm | - |
Flush Mount Surface protrusion | 13mm | 13mm | - |
Swivel Type | Yes | Yes | Yes |
Woofer | |||
Diameter | 6.5” | 6.5” | 6.5” |
Cone Material | Twaron + Cellulose | Twaron | Twaron |
Center Cap Material | Twaron | Polypropylene | - |
Surround Material | Butyl Rubber | Butyl Rubber | Butyl Rubber |
Basket Material | Stamped Steel | Stamped Steel | Stamped Steel |
Spider Material | Meta-aramid Fiber | Meta-aramid Fiber | Meta-aramid Fiber |
Magnet Material | Ferrite | Ferrite | Ferrite |
Magnet Weight | 15.2 oz | 11.3 oz | 11.3 oz |
Pole Size | 30mm | 30mm | 30mm |
Voice Coil Former Material | Glass Imide | Glass Imide | Glass Imide |
Voice Coil Wire Material | Copper, round wire | Copper, round wire | Copper, round wire |
Voice Coil Layers | 2 | 2 | 2 |
Mounting Depth | 2.6” | 2.6” | 2.6” |